Wire strippers and Cable cutters
SN-150 – wire stripper SN-150 type is designed for stripping single and multi-core wires in the range of 0,5÷6 mm2. The tools are equipped with a knife with cuts and blockade preventing from accidental opening. The tools are equipped with a knife which, cats cables and blockade preventing from accidental opening.
Length:
Weight:
Art No. 310-240800
SN-165 – wire stripper SN-165 is equipped with a blades for stripping cables in the range of 1,5÷6 mm2, blades for cutting copper cables and sockets for crimping insulating terminals (KOI, KWI) in the range of 0,5÷2,5 mm2.
Length:
Weight:
Art No. 310-240900
ST-150
– wire cutter ST-150 is designed to cut copper wire ropes up
to 13 mm2, and copper wires up to 4 mm2 (
Length:
Weight:
Art No. 310-241000
ST-136 – it is designed for cutting and stripping cables in the range 0,5÷6 mm2.
Length:
Weight:
Art No. 310-241100
Cutter KT 100 type
Hand cutter for aluminium, copper wires and cables. Equipped with specially designed shape of blades allows for easy cutting.
|
Type |
Wire cross section |
Max diameter |
Length |
Weight |
Item No. |
|
KT 100 |
10 |
8 |
165 |
0,15 |
310-100090 |
Cutters KT 101, KT 102, KT 103, KT 104 type
Hand cutters for aluminium and copper wires and cables. Equipped with specially designed blades, which allow easy cutting.
KT 102
|
Type |
Wire cross section |
Max diameter |
Length |
Weight |
Item No. |
|
KT 101 |
16 |
8 |
160 |
~0,16 |
310-100110 |
|
KT 102 |
35 |
11 |
200 |
~0,31 |
310-100700 |
|
KT 103 |
50 |
14 |
235 |
~0,40 |
310-111200 |
|
KT 104 |
70 |
16 |
165 |
~0,30 |
310-111210 |
Cutters KT 2/80,KT 2/250, KT 2/500 type
Hand cutters for aluminium and copper wires and cables. Equipped with especially designed blades, which allow easy cutting.
Accesories: Spare blade
KT 2/80 – Item No. 310-110121
KT 2/250 – Item No. 310-110131
KT 2/500 – Item No. 310-110141
KT
2/250
|
Type |
Wire cross section |
Max diameter |
Length |
Weight |
Item No. |
|
KT 2/80 |
70 |
20 |
320 |
~0,73 |
310-110100 |
|
KT 2/250 |
250 |
27 |
600 |
~1,54 |
310-110130 |
|
KT 2/500 |
500 |
35 |
800 |
~2,93 |
310-110140 |
Cutter KT 2/120 type
Accesories: Spare blade
KT 2/120 – Item No. 310-110201
|
Type |
Wire cross section |
Cutting diameter [mm] |
Length |
Weight |
Item No. |
|
KT 2/120 |
120 |
20 |
370 |
~0,80 |
310-110200 |
Cutters CC-185, CC-400 type
Hand cutters for aluminium and copper cables. Equipped with specially designed cutting blades, which allow easy cutting.
Accesories: Spare blade
CC-185 – Item No. 310-111863
CC-400 – Item No. 310-111862
|
Type |
Wire cross section |
Max diameter |
Length |
Weight |
Item No. |
|
CC-185 |
185 |
22 |
600 |
1,80 |
310-111860 |
|
CC-400 |
400 |
28 |
700 |
1,57 |
310-111861 |
Cutters KT-AFL… type for aluminium-steel ropes AFL type
An economical tool for general cutting Cuts soft and hard steel cable, wire rope, and small ACSR cable
Cutting Range (outside diameter):
- Copper and Aluminum cables – 25 mm
- Wire Rope – 13 mm
- ACSR cables – 12 mm
KT AFL 2
Designer for cuts hard cable, ACSR, ACAR, ZEBRA, and self-supporting telephone cable Cutting Range: 30 mm outside diameter Not recommended for cutting insulated copper or aluminum cable Jaw keeper prevents jaws from spreading while under heavy load Ratchet and chain increase cutting pressure as handles open and close Shear - cut blades Moderate pressure needed to open and close handles Can be used effectively with short strokes in confined spaces Increased mechanical advantage over manual cutters
Accesories: Spare blade
KT-AFL 1 – Item No. 310-111301
KT-AFL 2 (movable) – Item No. 310-111401
KT-AFL 2 (inmovable) – Item No. 310-111402
KT-AFL
1
KT-AFL 2
|
Type |
Length |
Weight |
Item No. |
|
KT-AFL 1 |
710 |
~2,2 |
310-111300 |
|
KT-AFL 2 |
743 |
~5,0 |
310-111400 |
Cutters SCC-60,SCC-200 type
Hand cutters for sennit steel cords and aluminium and copper cables. The hardness of steel – up to 42 HRC.
Accesories: Spare blade
SCC-60 – Item No. 310-111701
SCC-200 – Item No. 310-111801
|
Type |
Wire cross section |
Max diameter* |
Length |
Weight |
Item No. |
|
SCC-60 |
50 |
5/7 |
310 |
0,73 |
310-111700 |
|
SCC-200 |
150 |
9/12 |
600 |
1,80 |
310-111800 |
* Steel cords / steel bars.
Cutters KT 3/32, KT 3/52,KT 3/100 type
Thanks to a special design, they do not require big much strength for cutting. Cutting is made after performing several movements with a hand – „pumping”. The cutters are very durable and they facilitate work very much.
Accesories: Spare blade
KT 3/32 (movable) – Item No. 310-110601
KT 3/32 (inmovable) – Item No. 310-110602
KT 3/52 (movable) – Item No. 310-110701
KT 3/52 (inmovable) – Item No. 310-110702
KT 3/100 (movable) – Item No. 310-110808
KT 3/100 (inmovable) – Item No. 310-110810
KT
3/32
KT 3/52
KT 3/100
|
Type |
Max diameter |
Length |
Weight |
Item No. |
|
KT 3/32 |
32 |
250 |
0,64 |
310-110600 |
|
KT 3/52 |
52 |
280 |
0,86 |
310-110700 |
|
KT 3/100 |
100 |
600 |
5,50 |
310-110800 |
Note!
Ergom offers
cutters KT3/32 and KT3/52 for operation under up to 1000 V, equipped
with 1000 V insulation (KTI 3/32, KTI 3/52).
Cutters KT 4/32, KT 4/52 type
Cutters designed for cutting:
KT 4/32 – wire Cu or Al;
KT 4/52 – telephone cable.
Thanks to a special design, they do not require much strength for cutting. Cutting is made after performing several movements with a hand – „pumping”. The cutters are very durable and they facilitate work very much.
Accesories: Spare blade
KT 4/32 (movable) – Item No. 310-110931
KT 4/32 (inmovable) – Item No. 310-110932
KT 4/52 (movable) – Item No. 310-110936
KT 4/52 (inmovable) – Item No. 310-110937
|
Type |
Max diameter |
Length |
Weight |
Item No. |
|
KT 4/32 |
32 |
285 |
0,85 |
310-110930 |
|
KT 4/52 |
52 |
340 |
1,20 |
310-110935 |
Cutters KT 80 P type for the flat wire
Cable cutter designed
for cutting of flat wire of max width up to
|
Type |
Max width |
Length |
Weight |
Item No. |
|
KT 80 P |
81,5 (64 żyły) |
235 |
0,440 |
310-100075 |