Stripping tool RSI type

Stripping tool is designed for stripping the ends of single and multi-core wire. After inserting the wire into the tools and tightening of handles, insulation is cut-off and then taken off. The tool is equipped with special blades, preventing cores from mechanical damage. This tool is especially useful when we have wide variety of wires.

Length: 180 mm.

Weight: 0,360 kg

Accesories: Spare blade

RSI 4 – Item No. 310-210101

RSI 4/R – Item No. 310-210116

RSI /P – Item No. 310-210256

RSI 4/H – Item No. 310-210111

RSI /0,2-1,5 – Item No. 310-210121

RSI /K – Item No. 310-210251

Stripping tool RSEu type

The same application as RSI 4. Equipped with adjusting screw, for adjustment of blades spacing.

Incise blades

Stripper Weicon No 5 type

Designed for stripping wires and wires ropes within the range from 0,2÷6 mm2. Provides quick and easy stripping without damaging the wire. Equipped with blades for cutting copper and aluminium wires up to 4 mm2. Maximum length of taken off insulation: 12 mm, very light.

Item No. 310-210500

Accesories: Spare blade

Stripper weicon No 5 – Item No. 310-210600

Stripper Weicon No 7

Automatic wire stripper, for all common flat and round cables.

Application:

– Wire stripping of multicore flexible cables in range 0,5 ÷ 16 mm2;

– Single – Core cable stripping in range 0,5 ÷ 10 mm2;

– Wire stripping of two- or three-core flat cables with PVC insulation 0,75 ÷ 4 mm2;

– Easily accessible built-in side cutter up to max. 3 mm outside diameter;

– Max. stripping length without restriction.

Height: 180 mm.

Weight: 0,206 Kg.

Item No: 310-210507.

Accesories: Spare Blade

Stripper Weicon No 7 – Item No: 310-210605.

Stripper 371 B type

Designed for stripping wires and ropes within the range of 0,13÷6 mm2. Provides quick and easy stripping without damaging the wire. Thanks to very comfortable handles stripper 371B provides very easy hand operation.

Accesories: Spare blade

Stripper 371B – Item No. 310-210909

Stripper AB type

Designed for stripping round, single and multi-core wires, and flat wires. Equipped with stopper for precise adjustment of the length of taken-off insulation, and blades for cutting aluminium or copper wire. Stripper only notches wires insulation. To take it off it's necessary to pull at wire and/or tools.

Accesories: Spare blade

Stripper AB – Item No. 310-210705

Stripper, Stripper 10 type

Designed for stripping both from round and flat single and multi-core wires, and flat wires. Large quantity of notching blades provides good fitting and protects core against mechanical damage. Equipped with stopper for precise adjustment of the length of taken-off insulation, and blades for cutting aluminium or copper wire. They are equipped with swits which make possible to fit blades into thickness stripping insulation.

Accesories: Spare blade

Stripper – Item No. 310-210310

Stripper 10 – Item No. 310-210910

Stripper 16 / 6-16

Designer for stripping both from round single and multi-core wires within the range 6 – 16 mm². Provides quick and easy stripping without damaging the wire. Maximum stripping length – without restriction. Very light.

Height: 170 mm. 

Weight: 0,165 Kg.

Item No: 310-210902.

Accesories: Spare Blade

Stripper 16 – Item No: 310-210903.

Stripper 25 type

Designed for stripping single and multi-core cables. By turning a knob, it can be easily changed either to mode of stripping external insulation or to mode of stripping internal one for the thin wires.

Accesories: Spare blade

Stripper 25 – Item No. 310-210920

Knob

Duo-stripper

Professional knife for stripping round cables with diameters: 4÷28 mm and for stripping wires of cross section: 0,5÷6 mm2 (two functions covered by the same tool). Maximum length of taken-off insulation: up to 20 mm. Combines advantages of stripper and knife AM1.

Item No. 310-220700

Accesories: Spare blade

Duo-stripper – Item No. 310-220060

Spare blade rotary knife – Item No. 310-220080

Duo-crimper

Designed for stripping round single and multi-core wires, crimping cord-end terminals H and HI type, stripping and cutting copper wires in the range 0,5÷6 mm2.

– Provides easy stripping in the lenght of insulation: 5 mm. Designed for stripping with in the range of 0,5÷6 mm;

– There are two crimping dies for crimping cord-end terminals

    – in the first we can crimp cord-end terminals in the range of 0,5÷2,5 mm2;

    – in the second we can crimp cord-end terminals in the range of 4÷6 mm2.

– The tools are equipped with reliable and easy to use cutter for copper wires in the range of: 0,5÷6 mm2.

Accesories: Spare blade

Duo-crimper – Item No. 310-111701

Rotary knife AM 1/Ø… type

Very simple, light and effective knife for stripping round cables and wires of diameter in the range of 4÷50 mm. The depth of notching the insulation is adjusted by turning the screw, located at the bottom of the handle. Blade of the knife is set automatically in the direction of cutting. Knives AM 1/4-28G and H type are equipped with additional auxiliary blade and plastic reduction make possible to fit the knife into the wire diameter in the range of bottom. Spare blade are inside the rotary knife.

Rotary knives AM 10 and AM 11 type

Used for very quick and safe stripping round cables. Provides possibility of lengthwise or circumferencial cutting (after a precise adjustment of the blade). Additionally equipped with a blade facilitating taking off the notched insulation.

Accesories: Spare blade

AM 10 – Item No. 310-220910

AM 11 – Item No. 310-220940

Installation knife NM type

The installation knife is designed for wiremen. Blade is hidden into a knife handle.

Length: 200 mm. 

Item No. 310-112200

Designed for stripping PVC and PE insulation of the thickness greater than 5 mm. Minimum diameter of stripping cables greater than 25 mm. The tool are equipment with gear wheel, rolling in the outer side cables to pull behind oneself notching blades. The knife have a posibility of length wise, and involute cutting insulation. Two side blade make possible to fit the tolls the tickness of cutting insulation.

Item No. 310-220970

Accesories: Spare blade

AMS – Item No. 310-220971

Designed for stripping cables witch large diameters and cables with multi-layer insulation, thanks to a sliding end of the blade. Knife is protected witch a special cover. In case of lengthwise stripping the insulation should be notched by the tip of the knife and then knife should be moved along the cable. Perimeter stripping is made after alongside stripping, and is performed by turning the tool around the cable.

Length (without the cover): 175 mm.

Weight (without the cover): 0,06 kg.

Item No: 310-210507.

Cable preparation tools MK 07 and MK 08 type for XLPE cables

These dual purpose stripping tools have been specificully developed for the removal of both XLPE (and similar insulation) and semi-conductive screens. Only the highest quality materials knive been used throughout their manufacture to withstand heavy instalation usage and give long life with constant precision and reliability Both of them are compact and light weight and suitable for use in cramped and confined areas. They are easy to use not requiring special skills in either setting or operation and will rapidly remove any lenght of XLPE or semi-conductive screen. They have two kind of blades: for shaping – to remove out side insulation layer, and to remove semi-conductive screen.

Accesories: Spare blade

MK 07 cutting blade – Item No. 310-240201

MK 07 shaping blade – Item No. 310-240202

MK 08 cutting blade – Item No. 310-240301

MK 08 shaping blade – Item No. 310-240302