Hydraulic presses and heads

Hydraulic press HK 4

Hand hydraulic crimping press equipped with rotating head and protection. General purpose, practical, reliable. Suplplied in plastic box.

Weight: 1,55 kg. Length: 215 mm. Provides tightening force at least: 35 kN. Working preassure: 70 MPa.

Item No. 340-030100 (press+plastic box).

Accesories:

Hydraulic press HK 5; HK 6 and head GK 5

Hydraulic crimping press HK 5 – hand hydraulic press with rotating head and protection. General purpose, practical, reliable.

Weight: 2,3 kg. Length: 365 mm. Provides tightening force: at least 50 kN. Working preassure: 70 MPa.

Item No. 340-040100

Hydraulic crimping press HK 6 – hand hydraulic press with rotating head and protection. Two-stage hydraulic system, reducing the number of pumping. Crimping dies the same as for HK 5 press.

Weight: 2,45 kg. Length: 420 mm. Provides tightening force: at least 55 kN. Working preassure: 70 MPa.

Item No.: 340-040100.


Head GK 5 Typee – crimping head used together with hydraulic pump. General purpose, practical, reliable. Enables easy access. Application and crimping dies the same as for HK 5 press. Provides crimping force: at least 50 kN.

Working pressure: 70 MPa. Weight: 1,75 kg. Length: 190 mm.

Item No. 340-040106

Accesories:

Plastic box Typee PP-HK5/KH25 for hand press HK 5 and crimping dies. Very useful – Item No.: 397-100105.

Metal box Typee P-HK5 for hand press HK 5 and crimping dies. Very useful – Item No.: 397-100100.


Hydraulic press HK 5 EL

Electrical hydraulic crimping press equipped with rotating head and protection. General purpose, practical, reliable. 

Application and crimping dies the same as for HK 5 press.

Weight: 3,1 kg. Length: 305 mm. Battery drive: 12 V 1700 mAh. 

In set we deliver: press,  battery with charger 220 V / 50 Hz (1h - 1 charging = 70÷100 crimping), metal case.

Provides tightening force: min. 50 kN. Working preassure: 70 MPa.

Item No. 340-040101 (set).

Accesories:

Charger for HK 4 EL, HK 5 EL, KH 25 EL – Item No.: 340-040103;

Battery for HK 4 EL, HK 5 EL, KH 25 EL – Item No.: 340-040104;

Metal box for HK 4 EL, HK 5 EL, KH 25 EL – Item No.: 340-040105.

Dies HK5-… for tubular aluminium and copper terminal

Type
Item No.

HK5-4
340-045349

HK5-5
340-045350

HK5-6
340-045360

HK5-7
340-045370

HK5-8
340-045380

HK5-10
340-045390

HK5-11
340-045400

HK5-12
340-045410

HK5-13
340-045420

Socket No.

4

5

6

7

8

10

11

12

13

Type
Item No.

HK5-14
340-045430

HK5-16
340-045440

HK5-17
340-045450

HK5-18
340-045460

HK5-19
340-045470

HK5-20
340-045480

HK5-21
340-045490

HK5-22
340-045500

HK5-23
340-045510

Socket No.

 14

16

17

18

19

20

21

22

23

Type
Item No.

HK5-25
340-045520

HK5-25
340-045520

HK5-25
340-045520

HK5-25
340-045520

HK5-25
340-045520

HK5-25
340-045520

HK5-25
340-045520

HK5-25
340-045520

HK5-25
340-045520

Socket No.

 25

For terminals acc to table

Dies HK5-S… for forming roundshape of segmental cores

Type
Item No.

HK5-S10
340-041400

HK5-S16
340-041500

HK5-S25
340-041600

HK5-S35
340-041700

HK5-S50
340-041800

HK5-S70
340-041900

HK5-S95
340-042000

HK5-S120
340-042100

Cross section range
[mm2]

SM

10

16

25

35

50

70

95

120

SE

–

–

35

50

70

95

120

150

Type
Item No.

HK5-S185
340-042300

HK5-S240
340-042400

HK5-S240
340-042400

HK5-S240
340-042400

HK5-S240
340-042400

HK5-S240
340-042400

HK5-S240
340-042400

HK5-S240
340-042400

Cross section range
 [mm2]

SM

 150

185

240

SE

 185

240

300

Dies HK5-K… for soldered terminals KO, KW, KI, KL… 

Type
Item No.

HK5-K10
340-045110

HK5-K16
340-045120

HK5-K25
340-045130

HK5-K35
340-045140

HK5-K50
340-045150

HK5-K70
340-045160

Cross section range
[mm2]

10

16

25

35

50

70

Dies HK5-I... for insulated terminals KOI, KWI, KII, KLI…

Type
Item No.

HK5-I 10
340-043400

HK5-I 16
340-043500

HK5-I 25
340-043600

HK5-I 35
340-043700

HK5-I 50
340-043800

HK5-I 70
340-043810

HK5-I 95
340-043820

Cross section range
 [mm2]

10

16

25

35

50

70

95

Dies HK5-H... for cord-endterminals H and HI 

Type
Item No.

HK5-H10/2H4
340-043900

HK5-H16
340-044100

HK5-H25
340-044200

HK5-H35
340-044300

HK5-H50
340-044400

HK5-H70
340-044500

HK5-H95
340-044600

HK5-H120
340-044700

Cross section range
[mm2]

10
2x4

16

25

35

50

70

95

120

Type
Item No.

HK5-H150
340-044800

HK5-2H6
340-044900

HK5-2H10
340-045000

HK5-2H16
340-045100

HK5-2H16
340-045100

HK5-2H16
340-045100

HK5-2H16
340-045100

HK5-2H16
340-045100

Cross section range
[mm2]

150

2x6

2x10

2x16

Dies HK-ZL... for terminals ZLA 

Some sizes of crimping dies require to open tool head, in order to do the next crimp.

Typ
Item No.

HK5-ZL16
340-045550

HK5-ZL25
340-045551

HK5-ZL35
340-045552

HK5-ZL50
340-045553

HK5-ZL70
340-045554

HK5-ZL95
340-045555

HK5-ZL120
340-045556

Cross section range
[mm2]

16

25

35

50

70

95

120


Note!
On special request we can deliver dies for other purposes.

Hydraulic press WHPH 2 and head HPH 2 type

Press WHPH 2 type – hand hydraulic press equipped with rotating head and protection. General purpose, practical, reliable. Designed for crimping terminals and forming segmental cores. Supplied in box.

Length: 620 mm. Provides tightening force: at least 130 kN. Weight: 6 kg. Working preassure: 70 MPa.

Item No. 340-050100

Head HPH 2 type – crimping head used together with hydraulic pump. General purpose, practical, reliable. Enables easy access for crimping terminals. Supplied in box.

Application and crimping dies the same as for press of WHPH 2 type.

Provides crimping force: at least 130 kN. Length: 195 mm. Weight: 3,90 kg. Working pressure: 70 MPa.

Item No. 340-050110

Dies RHP-… for tubular copperterminal

Typ
Item No.

RHP-8
340-052600

RHP-10
340-052610

RHP-12
340-052620

RHP-14
340-052630

RHP-16
340-052640

RHP-17
340-052650

RHP-18
340-052660

RHP-20
340-052670

RHP-22
340-052680

Socket No.

8

10

12

14

16

17

18

20

22

Typ
Item No.

RHP-23
340-052690

RHP-25
340-052700

RHP-26
340-052701

RHP-28
340-052710

RHP-32
340-052720

RHP-32
340-052720

RHP-32
340-052720

RHP-32
340-052720

RHP-32
340-052720

Socket No.

23

25

26

28

32

For terminals acc to table

Dies AHP-… for tubular aluminium terminal

Typ
Item No.

AHP-10
340-052400

AHP-11
340-052410

AHP-12
340-052420

AHP-13
340-052430

AHP-14
340-052440

AHP-16
340-052450

AHP-18
340-052460

AHP-19
340-052470

AHP-20
340-052480

Socket No.

10

11

12

13

14

16

18

19

20

Typ
Item No.

AHP-21
340-052490

AHP-22
340-052500

AHP-23
340-052510

AHP-25
340-052530

AHP-28
340-052540

AHP-30
340-052550

AHP-32
340-052560

AHP-34
340-052570

AHP-34
340-052570

Socket No.

21

22

23

25

28

30

32

34

Dies HP-S… for forming roundshape of segmental cores

Typ
Item No.

HP-S10
340-051800

HP-S16
340-051810

HP-S25
340-051820

HP-S35
340-051830

HP-S50
340-051840

HP-S70
340-051850

HP-S95
340-051860

HP-S120
340-051870

Cross section range
[mm2]

SM

10

16

25

35

50

70

95

120

SE

–

–

35

50

70

95

120

150

Typ
Item No.

HP-S150
340-051880

HP-S185
340-051890

HP-S240
340-051900

HP-S300
340-051910

HP-S300
340-051910

HP-S300
340-051910

HP-S300
340-051910

HP-S300
340-051910

Cross section range
[mm2]

SM

 150

185

240

300

SE

 185

240

300

–

Dies HP-K... for soldered terminals KO, KW, KI, KL… 

Type
Item No.

HP-K10
340-051700

HP-K16
340-051710

HP-K25
340-051720

HP-K35
340-051730

HP-K50
340-051740

HP-K70
340-051750

HP-K95
340-051760

HP-K120
340-051770

HP-K150
340-051780

Cross section range
[mm2]

10

16

25

35

50

70

95

120

150

Dies HP-I… for insulated terminals KOI, KWI, KII, KLI…

Type
Item No.

HP-I 10
340-051600

HP-I 16
340-051610

HP-I 25
340-051620

HP-I 35
340-051630

HP-I 50
340-051640

HP-I 70
340-051650

HP-I 95
340-051660

HP-I 120
340-051670

HP-I 150
340-051680

Cross section range
[mm2]

10

16

25

35

50

70

95

120

150

Dies HP-H… for cord-endterminals H and HI

Type
Item No.

HP-H10/2H4
340-051570

HP-H16
340-051580

HP-H25
340-051590

HP-H35
340-051500

HP-H50
340-051510

HP-H70
340-051520

HP-H95
340-051530

HP-H120
340-051540

HP-H150
340-051550

Cross section range
[mm2]

10
2x4

16

25

35

50

70

95

120

150

Type
Item No.

HP-H185
340-051560

HP-2H6
340-051564

HP-2H10
340-051565

HP-2H16
340-051566

HP-2H16
340-051566

HP-2H16
340-051566

HP-2H16
340-051566

HP-2H16
340-051566

HP-2H16
340-051566

Cross section range
[mm2]

185

2x6

2x10

2x16

Dies HP-ZL… for terminals ZLA

Type
Item No.

HP-ZL16
340-050200

HP-ZL25
340-050201

HP-ZL35
340-050202

HP-ZL50
340-050203

HP-ZL70
340-050204

HP-ZL95
340-050205

Cross section range
[mm2]

16

25

35

50

70

95

Note!
On special request we can deliver dies for other purposes.


Hydraulic head HH 400 type

Crimping head used together with hydraulic pump. General purpose, practical, reliable. Enables easy crimping. Designed for crimping of terminals and forming of segmental cores. Supplied in plastic box.

Provides crimping force: at least 200 kN. Length: 240 mm. Weight: 3,80 kg. Working pressure: 70 MPa

Item No. 340-060100

Dies RH4-… for tubular copper terminal

Type
Item No.

RH4-8
340-064310

RH4-10
340-064320

RH4-12
340-064330

RH4-14
340-064340

RH4-16
340-064350

RH4-17
340-064360

RH4-18
340-064370

RH4-20
340-064380

RH4-22
340-064390

Socket No.

8

10

12

14

16

17

18

20

22

Type
Item No.

RH4-23
340-064400

RH4-25
340-064410

RH4-28
340-064420

RH4-32
340-064430

RH4-34
340-064440

RH4-26
340-064411

RH4-34
340-064440

RH4-34
340-064440

RH4-34
340-064440

Socket No.

23

25

28

32

34

26

For terminals acc to table

Dies AH4-… for tubular aluminium terminal

Type
Item No.

AH4-10
340-066100

AH4-11
340-066110

AH4-12
340-066120

AH4-13
340-066130

AH4-14
340-066140

AH4-16
340-066150

AH4-18
340-066160

AH4-19
340-066170

AH4-20
340-066180

Socket No.

10

11

12

13

14

16

18

19

20

Type
Item No.

AH4-21
340-066190

AH4-22
340-066200

AH4-23
340-066210

AH4-25
340-066220

AH4-28
340-066230

AH4-30
340-066240

AH4-32
340-066250

AH4-34
340-066260

AH4-34
340-066260

Socket No.

21

22

23

25

28

30

32

34

Dies H4-S… for forming roundshape of segmental cores

Type
Item No.

H4-S10
340-062500

H4-S16
340-062600

H4-S25
340-062700

H4-S35
340-062800

H4-S50
340-062900

H4-S70
340-063000

H4-S95
340-063100

H4-S120
340-063200

Cross section range
[mm2]

SM

10

16

25

35

50

70

95

120

SE

–

–

35

50

70

95

120

150

Type
Item No.

H4-S150
340-063300

H4-S185
340-063400

H4-S240
340-063500

H4-S300
340-063600

H4-S300
340-063600

H4-S300
340-063600

H4-S300
340-063600

H4-S300
340-063600

Cross section range
[mm2]

SM

 150

185

240

300

SE

 185

240

300

–

Dies H4-K... for soldered terminals KO, KW, KI, KL…

Type
Item No.

H4-K10
340-063800

H4-K16
340-063810

H4-K25
340-063820

H4-K35
340-063830

H4-K50
340-063840

H4-K70
340-063850

H4-K95
340-063860

H4-K120
340-063870

Cross section range
[mm2]

10

16

25

35

50

70

95

120

Type
Item No.

H4-K150
340-063880

H4-K185
340-063890

H4-K240
340-063900

H4-K240
340-063900

H4-K240
340-063900

H4-K240
340-063900

H4-K240
340-063900

H4-K240
340-063900

Cross section range
[mm2]

150

185

240

Dies H4-I... for insulated terminals KOI, KWI, KII, KLI…

Type
Item No.

H4-I 10
340-064000

H4-I 16
340-064010

H4-I 25
340-064020

H4-I 35
340-064030

H4-I 50
340-064040

H4-I 70
340-064050

H4-I 95
340-064060

H4-I 120
340-064070

Cross section range
[mm2]

10

16

25

35

50

70

95

120

Dies H4-H… for cord-endterminals H and HI

Type
Item No.

H4-H10/2H4
340-063670

H4-H16
340-063680

H4-H25
340-063690

H4-H35
340-063700

H4-H50
340-063710

H4-H70
340-063720

H4-H95
340-063730

H4-H120
340-063740

H4-H150
340-063750

Cross section range
[mm2]

10
2x4

16

25

35

50

70

95

120

150

Type
Item No.

H4-H185
340-063760

H4-2H6
340-063770

H4-2H10
340-063780

H4-2H16
340-063790

H4-2H16
340-063790

H4-2H16
340-063790

H4-2H16
340-063790

H4-2H16
340-063790

H4-2H16
340-063790

Cross section range
[mm2]

185

2x6

2x10

2x16

Dies H4-ZL… for terminals ZLA

Some sizes of crimping dies require to open tool head, in order to do the next crimp.

Type
Item No.

H4-ZL16
340-066300

H4-ZL25
340-066301

H4-ZL35
340-066302

H4-ZL50
340-066303

H4-ZL70
340-066304

H4-ZL95
340-066305

H4-ZL120
340-066306

Cross section range
[mm2]

16

25

35

50

70

95

120

Note!
On special request we can deliver dies for other purposes.

Hydraulic head HH 630 type

Crimping head used together with hydraulic pump. General purpose, practical, reliable. Enables easy crimping. Designed for crimping terminals and forming segmental cores.

Provides crimping force: at least 250 kN. Length: 260 mm. Weight: 6,50 kg. Working pressure: 70 MPa.

Item No. 340-070100

Dies RH6-… for tubular copperterminal

Type
Item No.

RH6-8
340-072100

RH6-10
340-072110

RH6-12
340-072120

RH6-14
340-072130

RH6-16
340-072140

RH6-17
340-072150

RH6-18
340-072160

RH6-20
340-072170

Socket No.

8

10

12

14

16

17

18

20

Type
Item No.

RH6-22
340-072180

RH6-23
340-072190

RH6-25
340-072200

RH6-28
340-072210

RH6-32
340-072220

RH6-34
340-072230

RH6-36
340-072232

RH6-26
340-072201

Socket No.

 22 23

25

28

32

34

36

26

Type
Item No.

RH6-38
340-072240

RH6-42
340-072250

RH6-44
340-072260

RH6-44
340-072260

RH6-44
340-072260

RH6-44
340-072260

RH6-44
340-072260

RH6-44
340-072260

Socket No.

38

42

44

For terminals acc to table

Dies AH6-… for tubular aluminium terminal

Type
Item No.

AH6-10
340-075100

AH6-11
340-075110

AH6-12
340-075120

AH6-13
340-075130

AH6-14
340-075140

AH6-16
340-075150

AH6-18
340-075160

AH6-19
340-075170

Socket No.

10

11

12

13

14

16

18

19

Type
Item No.

AH6-20
340-075180

AH6-21
340-075190

AH6-22
340-075200

AH6-23
340-075210

AH6-25
340-075220

AH6-28
340-075230

AH6-30
340-075240

AH6-32
340-075250

Socket No.

 20 21

22

23

25

28

30

32

Type
Item No.

AH6-34
340-075260

AH6-38
340-075270

AH6-44
340-075280

AH6-44
340-075280

AH6-44
340-075280

AH6-44
340-075280

AH6-44
340-075280

AH6-44
340-075280

Socket No.

34

38

44

Dies H6-S… for forming roundshape of segmental cores

Type
Item No.

H6-S10
340-070400

H6-S16
340-070410

H6-S25
340-070420

H6-S35
340-070430

H6-S50
340-070440

H6-S70
340-070450

H6-S95
340-070460

H6-S120
340-070470

Cross section range
[mm2]

SM

10

16

25

35

50

70

95

120

SE

–

–

35

50

70

95

120

150

Type
Item No.

H6-S150
340-070480

H6-S185
340-070490

H6-S240
340-070500

H6-S300
340-070510

H6-S300
340-070510

H6-S300
340-070510

H6-S300
340-070510

H6-S300
340-070510

Cross section range
[mm2]

SM

 150

185

240

300

SE

 185

240

300

–

Dies H6-K... for soldered terminals KO, KW, KI, KL…

Type
Item No.

H6-K10
340-070550

H6-K16
340-070560

H6-K25
340-070570

H6-K35
340-070580

H6-K50
340-070590

H6-K70
340-070600

H6-K95
340-070610

H6-K120
340-070620

Cross section range
[mm2]

10

16

25

35

50

70

95

120

Type
Item No.

H6-K150
340-070630

H6-K185
340-070640

H6-K240
340-070650

H6-K240
340-070650

H6-K240
340-070650

H6-K240
340-070650

H6-K240
340-070650

H6-K240
340-070650

Cross section range
[mm2]

150

185

240

Dies H6-I... for insulated terminals KOI, KWI, KII, KLI…

Type
Item No.

H6-I 10
340-070680

H6-I 16
340-070690

H6-I 25
340-070700

H6-I 35
340-070710

H6-I 50
340-070720

H6-I 70
340-070730

H6-I 95
340-070740

H6-I 120
340-070750

H6-I 150
340-070760

Cross section range
[mm2]

10

16

25

35

50

70

95

120

150

Dies H6-H... for cord-endterminals H and HI

Type
Item No.

H6-H10/2H4
340-070770

H6-H16
340-070780

H6-H25
340-070790

H6-H35
340-070800

H6-H50
340-0670810

H6-H70
340-070820

H6-H95
340-070830

H6-H120
340-070840

Cross section range
[mm2]

2x4
10

16

25

35

50

70

95

120

Type
Item No.

H6-H150
340-070850

H6-H185
340-070860

H6-2H4
340-070870

H6-2H6
340-070880

H6-2H10
340-070890

H6-2H16
340-070900

H6-2H16
340-070900

H6-2H16
340-070900

Cross section range
[mm2]

150

185

2x4

2x6

2x10

2x16

Note!
– On special request we can deliver dies for other purposes.


Hydraulic head HH 1000 type

Crimping head used together with hydraulic pump. General purpose, practical, reliable. Designed for crimping of terminals and forming of segmental cores.

Provides crimping force: at least 450 kN. Working pressure: 70 MPa. Weight: 11 kg. Length: 300 mm.

Item No. 340-070000

Dies RH1-… for tubular copperterminal

Type
Item No.

RH1-18
340-070021

RH1-20
340-070022

RH1-22
340-070023

RH1-23
340-070024

RH1-25
340-070025

RH1-26
340-070026

RH1-28
340-070027

RH1-32
340-070028

Socket No.

18

20

22

23

25

26

28

32

Type
Item No.

RH1-34
340-070029

RH1-36
340-070030

RH1-38
340-070031

RH1-42
340-070032

RH1-44
340-070033

RH1-52
340-070034

RH1-58
340-070035

RH1-58
340-070035

Socket No.

 34

36

38

42

44

52

58

For terminals acc to table

Dies AH1-… for tubular aluminium terminal

Type
Item No.

AH1-19
340-070040

AH1-20
340-070041

AH1-21
340-070042

AH1-22
340-070043

AH1-23
340-070044

AH1-25
340-070045

AH1-28
340-070046

AH1-30
340-070047

Socket No.

19

20

21

22

23

25

28

30

Type
Item No.

AH1-32
340-070048

AH1-34
340-070049

AH1-38
340-070050

AH1-44
340-070051

AH1-52
340-070052

AH1-58
340-070053

AH1-58
340-070053

AH1-58
340-070053

Socket No.

 32

34

38

44

52

58

Note!
– On special request we can deliver dies for other purposes.

Comparison of features hydraulic pressesand heads

 Type

HK 4,
HK 4 EL

HK 5, HK 5 EL, GK 5

WHPH 2, HPH 2

HH 400

HH 630

HH 1000

 Weight 
[kg]

1,55

2,35
3,1; 1,75

6‚0
3,9

3,8

6,5

11

for copper terminals with normal execution (e.g. KOR, KL type)

 Wire cross section
[mm2]

6÷120

6÷240

16÷400

16÷500

16÷625

120÷625

for copper terminals acc. to DIN 46235 (e.g. KDR, KLD type)

6÷95

6÷185

16÷300

16÷300

16÷625

95÷1000

Segmental core

10÷120

10÷240

10÷300

10÷300

10÷300

–

for aluminium terminals with thick-walled execution (e.g. KA, KLA type)

16÷50

16÷120

16÷185

16÷240

16÷240

50÷240

for aluminium terminals acc. to DIN 46329 (e.g. KRA, LA type)

16÷70

16÷150

16÷240

16÷300

16÷500

70÷625

for aluminium terminals with thin-walled execution (e.g. 2KAm, 2ZA type)

16÷95

16÷185

16÷240

16÷240

16÷240

95÷240

for uninsulated terminals (e.g. KO, KW)

10÷70

10÷70

10÷150

10÷240

10÷240

–

for insulated terminals (e.g. KOI, KWI)

10÷70

10÷95

10÷150

10÷150

10÷150

–

for cord-end terminals (e.g. H, HI type)

10÷70

10÷150

10÷185

10÷185

10÷185

–

Dies

HK4-...

HK5-...

HP-...
RHP-...
AHP-...
*

H4-...
RH4-...
AH4-...
*

H6-...
RH6-...
AH6-...
*

H1-...
RH1-...
AH1-...
*

* R – for copper;
   A – for alluminium.


Collaborate crimping heads with the pumps


Do For the feeding all of this crimping heads we can use each of this hydraulic pumps. They are equiped with 2 meters hydraulic hose. Pumps with the hose 3, 5, 9, 12 or 15 meters available on request.