Electric heat-gun, EOP 2000
Designed for shrinking heat-shrink tubes, joints and terminations in power engineering, removing old paints, drying, welding plastic elements.
Professional tool of a high power. Equipped with a modern, electronic control system with LED signalling. Housing made of a fire retardand, impact and high temperature resistant plastic.
|
Technical data |
|
|
Power voltage, [V AC] |
230 |
|
Maximum power, [W] |
2000 |
|
Output air temperature scope, [°C] |
150÷650 |
|
Air flow, [m3/h] |
5 |
|
Protection |
Thermostat, electronic program of switching off during 80 s |
|
Ambient temperature, [°C] |
-10÷+50 |
|
Indicators |
8xLED, |
|
Dimensions, [mm] |
255x200x70 |
|
Weight [kg] |
0,8 |
|
Protection class |
IP40 |
|
Item No. |
E05ME-05010100101 |
Gas heater, GL 1300
Item No. E05ME-05020100101
GL 1300 gas heater has its own supply source and is a multipurpose tool. It has its own gas reservoir which is filled in the same manner as the reservoir of a gas lighter. One filling is enough for 90 to 180 operating hours according to the temperature setting. The temperature can be smoothly adjusted by changing gas and air supply. This all purpose tool may be operated in three modes:
1. With a copper soldering tip fitted with catalytic converter, for soldering and unsoldering in repairing, modelling-works, laboratory and at stained-glass windows.
2. With not air nozzle fitted with catalytic converter, for shrinking heat shrinkable tubes, as well as for soldering and unsoldering in repairing and laboratory.
3. With open flame for soldering thin copper pipes, manufacturing jewelry or tin plating of corroded places on car bodies.
Technical data: Gas tank capacity: approx. 25 ml
Working temperature:
–
with
soldering tips up to
–
with
hot air nozzles up to
–
open
flame up to
Power: up to 135 W
Operation time: up to 180 min.
Weight:
Length:
Diameter:
Standard equipment: hot air nozzle, soldering tip.
Gas soldering tool: Z-GL 3114
Application: Soldering, brazing, shrinking heat-shrink tubes, cutting plastic elements.
Set contents:
Z-GL
3114
– Soldering torch, soldering wire, tips: soldering, conical,
diagonal
|
|
|
Type |
Max. temperature |
Piezoelectric |
Item No. |
|
Z-GL 3114 |
500 / 1300 |
yes |
E05ME-05030100101 |
Note!
We recommend to
use our butane gas (300 ml pack).
Item No. E05ME-05040100101
Accesories
Soldering SH-10 heads for gas tools Z-GL and GL (spare parts).
| Description |
Type |
Tool types |
Item No. |
|
 |
Soldering heat with catalyst | SH-10 | Z-GL 3114 | E05ME-05039000201 |
Butane gas
Item No. E05ME-05040100101
Gas for gas heater, GL
Soldering guns, LT
Multipurpose tools for many various applications in electrical and electronic engineering.
|
Type |
Power voltage |
Power |
Operating temperature |
Item No. |
|
LT-75 |
230 |
75 |
400 |
E05ML-02030100101 |
|
LT-75/45 |
75/40 |
400/300 |
E05ML-02030100201 |
|
|
LT-100P |
100 |
450 |
E05ML-02030100301 |
Wires with flux for soft soldering, DW type
Applied for high quality joints in electrical and electronic engineering.
Melting-point:
Soldering
temperature:
Wire
weight on spool:
| Type | Wire diameter | Alloy of | Item No. | REACH |
| DW 0,25/SnCu | 0,25 | 99% Sn, 1% Cu | E05ML-01010100101 | √ |
| DW 0,38/SnCu | 0,38 | E05ML-01010100201 | √ | |
| DW 0,50/SnCu | 0,50 | E05ML-01010100301 | √ | |
| DW 0,56/SnCu | 0,56 | E05ML-01010100401 | √ | |
| DW 0,70/SnCu | 0,70 | E05ML-01010100501 | √ | |
| DW 0,90/SnCu | 0,90 | E05ML-01010100601 | √ | |
| DW 1,00/SnCu | 1,00 | E05ML-01010100701 | √ | |
| DW 2,00/SnCu | 2,00 | E05ML-01010100801 | √ | |
| DW 1,00/SnAg (*) | 1,00 | 96% Sn, 4% Ag | E05ML-01010200901 | - |
| DW 0,25/TLR | 0,25 | 60% Sn; 40% Pb. | E05ML-01010200101 | √ |
| DW 0,38/TLR | 0,38 | E05ML-01010200201 | √ | |
| DW 0,50/TLR | 0,50 | E05ML-01010200301 | √ | |
| DW 0,56/TLR | 0,56 | E05ML-01010200401 | √ | |
| DW 0,70/TLR | 0,70 | E05ML-01010200501 | √ | |
| DW 0,90/TLR | 0,90 | E05ML-01010200601 | √ | |
| DW 1,00/TLR | 1,00 | E05ML-01010200701 | √ | |
| DW 2,00/TLR | 2,00 | E05ML-01010200801 | √ |
Solder paste – kontakt
Mild, ready for direct use, non corroding flux of paste consistence, made on the base of rosin and organic activating additives from chlorine free compounds.
Applied in electrical and electronic engineering (also for printed circuits). Remnants of the paste after soldering cause no corrosion and may remain on welds.
Weight:
Item No. E05ML-01010300101
REACH: √
