Holders and separators

 Holders for wires in the trunking

Type CO holders are used to support the wires during duct installation on a vertical surface. The holder must be screwed on inside the duct and next the wires can be placed in it by a light pressure. The holder yields owing to its elasticity. This way the wires are protected against falling out.

Colour: grey.

Packing: 5 pcs.; common packing: 5 x 5 = 25 pcs.

Type

Use to the ducts *

Execution

Art. No.

CO 40x40

40 x 40

1

120-308242

CO 60x40

60 x 40

1

120-308243

CO 80x40

80 x 40

2

120-308244

CO 100x40

100 x 40

2

120-308245

CO 120x40

40 x 60

2

120-308246

CO 40x60

40 x 60

1

120-308262

CO 60x60

60 x 60

1

120-308263

CO 80x60

80 x 60

2

120-308264

CO 100x60

100 x 60

2

120-308265

CO 120x60

120 x 60

2

120-308266

CO 40x80

40 x 80

1

120-308282

CO 60x80

60 x 80

1

120-308283

CO 80x80

80 x 80

2

120-308284

CO 100x80

100 x 80

2

120-308285

CO 120x80

120 x 80

2

120-308286

CO 40x100

40 x 100

1

120-308292

CO 60x100

60 x 100

1

120-308293

CO 80x100

80 x 100

2

120-308294

CO 100x100

100 x 100

2

120-308295

* KOP, KOPD, KOPS, KOPDS, KN


Exe. 1


Exe. 2


 Separators of wire groups in ducts

SES separators are used to segregate the wires inside of a duct into the groups according to the designer requirement, installation, etc. Separators are mounted in ducts of width 80, 100, 120 and height 40, 60, 80. At the heights 40 and 60 the needless separator part must be broken away what it is facilitated by a special cross-section reduction (see “B” detail).

Material: PVC, flammability class V0 acc. to UL 94

“B” detail


                                                  Separators

Type

colour

Length
[m]

Packing
[pcs.]

Art. No.

SES/2

white
RAL 9001

2

25

120-308200

SES G/2

grey
RAL 7030

2

25

120-308202