Solar collectors installations
Solar collector Black Chromium



Technical parameters
Type A2 Cr A2 Cr/M B2 Cr B2 Cr/M
Version - Vertical Vertical Horizontal Horizontal
Collector’s surface [m²] 1,92 1,92 1,92 1,92
Absorber’s surface [m²] 1,70 1,70 1,70 1,70
Length [A] [mm] 1953 1953 1953 1953
Width [B] [mm] 981 981 981 981
Height [H] [mm] 104 104 104 104
Volume of the fluid inside collector [dm³] ~0,9 ~0,9 ~1,0 ~1,0
Casing - Aluminum tank Aluminum tank Aluminum tank Aluminum tank
Casing’s colour - No painted Colour brown
(RAL 8019)		 No painted Colour brown
(RAL 8019)
Absorber’s cover - Black chromium Black chromium Black chromium Black chromium
Absorption coefficient α > 0,96±0,01 α > 0,96±0,01 α > 0,96±0,01 α > 0,96±0,01
Emission coefficient - ε < 0,10±0,02 ε < 0,10±0,02 ε < 0,10±0,02 ε < 0,10±0,02
Max working temperature [ºC] 100 100 100 100
Permissible temp. without circulation [ºC] 180 180 180 180
Max working pressure [bar] 6 6 6 6
Weight [kg] 39 39 39 39
Insulation [mm] 50 wool 50 wool 50 wool 50 wool
Collector cover - Hardened solar
glass – thickness
4 mm		 Hardened solar
glass – thickness
4 mm		 Hardened solar
glass – thickness
4 mm		 Hardened solar
glass – thickness
4 mm

Solar Collector

Technical parameters
Type A2 S A2 S/M B2 S B2 S/M
Version - Vertical Vertical Horizontal Horizontal
Collector’s surface [m²] 1,92 1,92 1,92 1,92
Absorber’s surface [m²] 1,70 1,70 1,70 1,70
Length [A] [mm] 1953 1953 1953 1953
Width [B] [mm] 981 981 981 981
Height [H] [mm] 104 104 104 104
Volume of the fluid inside collector [dm³] ~0,9 ~0,9 ~1,0 ~1,0
Casing - Aluminum tank Aluminum tank Aluminum tank Aluminum tank
Casing’s colour - No painted Colour brown
(RAL 8019)		 No painted Colour brown
(RAL 8019)
Absorber’s cover - Special cover Special cover Special cover Special cover
Absorption coefficient α > 0,95±0,20 α > 0,95±0,20 α > 0,95±0,20 α > 0,95±0,20
Emission coefficient - ε < 0,05±0,02 ε < 0,05±0,02 ε < 0,05±0,02 ε < 0,05±0,02
Max working temperature [ºC] 100 100 100 100
Permissible temp. without circulation [ºC] 180 180 180 180
Max working pressure [bar] 6 6 6 6
Weight [kg] 39 39 39 39
Insulation [mm] 50 wool 50 wool 50 wool 50 wool
Collector cover - Hardened solar
glass – thickness
4 mm		 Hardened solar
glass – thickness
4 mm		 Hardened solar
glass – thickness
4 mm		 Hardened solar
glass – thickness
4 mm


Solar collectors installations

Storage tanks
Description Name
(Item no.)
Water exchangers with spiral coil pipe are used for generating hot usable water. They can operate with many different kinds of boilers applied in central heating systems or with solar collectors. Storage tank for water is made of steel sheet covered with vitreos enamel. Storage tank is insulated by polystyrene froth 40 or 100 mm thick and is placed inside protective cover made of sky. Optionally storage tank was equipped with heater of 2 kW.

Dimensions:
Storage tank Ø height
150 1 560 mm 1430 mm
200 1 720 mm 1210 mm
250 1 720 mm 1450 mm
300 1 720 mm 1850 mm
400 1 810 mm 1850 mm
500 1 810 mm 2150 mm


Storage Tank
WGJ-S 150E
(774-000025)
Storage Tank
WGJ-S 200E
(774-000026)
Storage Tank
WGJ-S 250E
(774-000027)
Storage Tank
WGJ-S 300E
(774-000028)
Storage Tank
WGJ-S 400E
(774-000029)
Storage Tank
WGJ-S 500E
(774-000030)
Water exchangers with two spiral coil pipes used for generating hot usable water. They can operate with many different kinds of boilers applied in central heating systems or with solar collectors. Storage tank for water is made of steel sheet covered with vitreos enamel. Storage tank is insulated by polystyrene froth 40 or 100 mm thick and is placed inside protective cover made of sky. Optionally storage tank was equipped with heater of 2 kW.

Dimensions:
Storage tank Ø height
250 1 720 mm 1450 mm
300 1 720 mm 1850 mm
400 1 810 mm 1850 mm
500 1 810 mm 2150 mm

Storage Tank
WGJ-S 250E
(774-000031)
Storage Tank
WGJ-S 300E
(774-000032)
Storage Tank
WGJ-S 400E
(774-000033)
Storage Tank
WGJ-S 500E
(774-000034)
Water heater in metal housing with one or two spiral coil pipes is adjusted for co-operation with boiler applied in central heating systems or with solar collectors. Storage tank for water is made of steel sheet covered with double layer of vitreos enamel which is highly resistant to corrosion. Insulation is made of polyurethane foam 50 mm thick placed directly on the storage tank.

Dimensions:
Storage tank Ø height
200 1 600 mm 1340 mm
300 1 600 mm 1797 mm
400 1 680 mm 1832 mm
500 1 760 mm 1838 mm

Type:
• ER –  with one coil pipe,
• ERR – with two coil pipes.		 Storage Tank
HT 200 ER
(774-000016)
Storage Tank
HT 200 ERR
(774-000009)
Storage Tank
HT 300 ER
(774-000017)
Storage Tank
HT 300 ERR
(774-000010)
Storage Tank
HT 400 ER
(774-000043)
Storage Tank
HT 400 ERR
(774-000011)
Storage Tank
HT 500 ER
(774-000019)
Storage Tank
HT 500 ERR
(774-000012)
Water heater in metal housing with one or two spiral coil pipes is adjusted for co-operation with boiler applied in central heating systems or with solar collectors. Storage tank for water is made of steel sheet covered with double layer of vitreos enamel which is highly resistant to corrosion. Insulation is made of polyurethane foam 50 mm thick placed directly on the storage tank. External coating made of sky can be taken off.

Dimensions:
Storage tank Ø height
200 1 600 mm 1340 mm
300 1 600 mm 1797 mm
400 1 680 mm 1832 mm
500 1 760 mm 1838 mm

Type:
• ER – with one coil pipe,
• ERR – with two coil pipes.
 Storage Tank
BE 200 ERM
(774-000020)
Storage Tank
BE 300 ERM
(774-000021)
Storage Tank
BE 300 ERMR
(774-000013)
Storage Tank
BE 400 ERM
(774-000022)
Storage Tank
BE 400 ERMR
(774-000014)
Storage Tank
BE 500 ERM
(774-000024)
Storage Tank
BE 500 ERMR
(774-000015)


Solar groups
Description Name
(Item no.)
Complete solar group consisting of:
• solar pump 20/6,
• check valve,
• ball valve,
• thermometer,
• manometer,
• safety valve 6 bars,
• valve for filling up the installation,
• terminal ¾ GW.		 Solar Group
FlowCon – RS
(773-000019)
Double solar group consisting of:
• solar pump 20/6,
• two gravitational valves,
• ball valve,
• thermometer,
• manometer,
• safety valve 6 bars,
• valve for filling up the installation,
• flow meter 1÷13 l/min ,
• permanentny odpowietrznik (Air - Stop),
• connection set of equalizing vessel together with assembly jig.		 Solar Group
FlowCon – FA
(773-000027)

Microprocessor controllers

Description Name
(Item no.)
Electronic controller applied in solar installations guarantee proper and effective system operation. The controller has 3 temperature sensors
as a standard:
– temperature sensor of solar circulation installed inside the solar collector
– temperature sensor of the water installed inside the accumulative reservoir
– additional temperature sensor dependent on configuration
Solar system controller switches on the pump of collector circulation only then when the temperature inside the collector is higher than the temperature in the storage reservoir by given value. When the difference of temperatures between collector and reservoir will decrease to switching off value at the controller the pump is shut down. In order to secure the installation against over-heating, the controller is set at max. temperature (Tmax) to which water in the storage reservoir can be heated. After reaching this temperature the controller will shut down the circulation pump independently on the difference of temperatures between collector and reservoir. After switching of the pump temperature inside the collector may rise above 100 ºC, what is not so dangerous if the cumulative reservoir gathers evaporated heating fluid from the collector.. After decreasing temperature in accumulative reservoir below Tmax and cooling down the collector, solar installation restarts its work. Controller G 403 P04 is an independent regulation block in special casing made from two parts. Working parameters can be justified to actual working conditions and type of installation. Such controller can work in the following systems:
1. Controlling solar system pump for heating the water
2. Controlling solar system pump and servicing the pump which charges the storage reservoir from central heating boiler
3. Controlling solar system pump and stirring pump between reservoir connected to solar collectors and reservoir cooperating with central heating boiler
4. Controlling solar system pump and three-pass valve for the system with the exchanger of swimming pool
5. Controlling solar system pumps in version with solar collectors placed on two separate roofs
6. Controlling solar system pump and three-pass valve for the system supported with central heating		 Controller
GECO
G - 403
(773-000008)
Housing for Controller
GECO
(773-000009)

Solar installation accessories
Description Name
(Item no.)
Straight, self-locking connector Ø18 mm
 Self-locking connector
(773-000002)

Muff connector GW Ø18 x ½”

 Muff connector
(773-000012)

Elbow self-locking connector Ø18 mm

 Elbow connector
(773-000004)

Self-locking pipe tee Ø18 mm

 Self-locking pipe tee
(773-000003)

Double-locking pipe tee 18 x GW½” x 18

 Double-locking pipe tee
(773-000011)

Plug ½

 Plug
(773-000015)
Immersion sleeve ½ used as a shield of temperature sensor. Assembled at the place of installation.

 Immersion sleeve
(773-000010)
Automatic vent valve ½ with cut-off valve. Max. working pressure 6 bars.
 Vent ½
(773-000018)
Hand operated pump for filling up solar installations with valve GZ ½ , 15 mm terminal pipe. Ability for gaining the pressure of 4 bars. Hand operated pump
(773-000013)
Diaphragmatic cylinder designed for working in solar installations. Max. working temp. 120 ºC. Terminal – ¾” GZ.
 Diaphragmatic cylinder 18 l
(773-000005)
Diaphragmatic cylinder 25 l
(773-000016)
Trim for diaphragmatic
cylinder
(773-000024)
Terminal for diaphragmatic cylinder: Length – 50 cm, Terminal – ¾”
 Terminal for diaphragmatic
cylinder
(773-000042)
Cleading K-FLEX EC designed for solar installations is made of synthetic rubber. Insulation is made of very elastic material which is characterized by closed cell structure, high coefficient of resistance to diffusion of steam water and low heat conductivity. Resistance to UV radiation and other external conditions is up to 120 ºC.
 Lag 9x18
(773-000028)
Lag 13x18
(773-000029)
Lag 19x18
(773-000030)
Lag 9x22
(773-000031)
Lag 13x22
(773-000032)
Lag 19x22
(773-000033)
Lag HT-175 13x28
(773-000026)
Liquid in solar installations is water solution of propylene glycol which consists of inhibitors ensuring perfect anti-corrosion properties. Crystallization temp. – 25 ºC.
 ERGOLID EKO fluid 20 l
(773-000006)


Fastening sets

Description Name
(Item no.)
Roof holder screw down directly on to roof rafters, it used for mounting crosswise slat.
 Element A
(770-R01001)
Element A1
(770-R01002)
Mounting slat for solar collectors:
1. vertical collectors:
• Element B1/vertical 1140 mm,
• Element B2/vertical 2190 mm,
• Element B3/vertical 3230 mm,
• Element B4/vertical 4300 mm,
• Element B5/vertical 5360 mm


2. horizontal collectors
• Mounting slat B1/horizontal 2140 mm,
• Mounting slat B2/ horizontal 4190 mm,
• Mounting slat B3/ horizontal 6240 mm.
 Mounting slat B1/horiz.
(770-P01004)
Mounting slat B1/vert
(770-P02001)
Mounting slat B2/horiz.
(770-P01005)
Mounting slat B2/vert
(770-P02002)
Mounting slat B3/horiz.
(770-P01006)
Mounting slat B3/vert
(770-P02003)
Mounting slat B4/horiz.
(770-P01007)
Mounting slat B5/horiz.
(770-P01008)
Grip for mounting slat preventing collector from sliding form assembly bus bar.
 Grip E
(770-P01012)
Clamp for fixing solar collectors on mounting slat in tank shape.
Type: Grip DP – right, Grip DL – left
 Grip DP
(770-R01031)
Grip DL
(770-R01030)
Grip for fixing solar collector on mounting slat, applied between two panels.
 Grip CD
(770-R01032)
Supporting bracket for fixing the mounting slat.
 Bracket L/horiz.
(770-P01029)
Bracket L1
(770-P01015)
Supporting bracket for fixing mounting slat, installed on roof patch
 Bracket P
(770-P01033)
Bracket P1
(770-R01017)
Supporting bracket for fixing the bracket, applied in covering the roof with corrugated elements. Bracket R
(770-R01019)
Supporting bracketl for fixing the bracket, applied in angle installation of solar collectors.
 Bracket X
(770-R01029)
Supporting bracket for fixing mounting slat. 
 Mounting beam F/horiz.
(770-R01003)
Mounting beam F/vert
(770-R02001)
Supporting bracket for fixing suspending elements, applied while angle mounting on the roof. Mounting beam G/horiz.
(770-R01004)
Mounting beam G/vert
(770-R02001)

Supporting bracket for fixing mounting slat, applied while angle mounting on the roof. 
 Mounting beam H/horiz.
(770-R01006)
Element H/vert
(770-R02001)

Supporting bracket - support for fixing suspending elements, applied while angle mounting on the roof.
Type: Element K – for vertical collectors, Element K/vert – for horizontal collectors.
 Mounting beam K10/horiz.
(770-R01007)
Mounting beam K15/horiz.
(770-R01008)
Mounting beam K20/horiz.
Mounting beam K20/horiz.
Элемент K20/horiz.
(770-R01008)
Mounting beam K25/horiz.
(770-R01010)
Mounting beam K30/horiz.
(770-R01011)
Mounting beam K35/horiz.
(770-R01012)
Mounting beam K40/horiz.
Mounting beam K40/horiz.
Элемент K40/horiz.
(770-R01013)
Mounting beam K45/horiz.
(770-R01014)
Mounting beam K10/vert
(770-R02005)
Mounting beam K15/vert
(770-R02006)
Mounting beam K20/vert
(770-R02007)
Mounting beam K25/vert
(770-R02008)
Mounting beam K30/vert
(770-R02009)
Mounting beam K35/vert
(770-R02010)
Mounting beam K40/vert
(770-R02011)
Mounting beam K45/vert
(770-R02012)
Roof holder screw down directl y on to roof rafters, it used for mounting crosswise slat.
 Bracket M
(770-P01031)
Bracket M1
(770-R01016)
Carrying bracket – applied during installation of collectors with deviation towards south direction Bracket W
(770-R01027)
Bracket W1
(770-R01028)
Carrying bracket – applied during installation of collectors with deviation towards south direction (directly on grips) Bracket Z
(770-R01023)
Bracket Z1
(770-R01024)
Mounting beam adjusted for installation of collectors on the south wall of the building Mounting beam FS/horiz.
(770-R01033)