Electric heat-gun EOP 2000
Designed for shrinking heat-shrink tubes, joints and terminations in power engineering, removing old paints, drying, welding plastic elements. Proffessional tool of a high power. Equipped with a modern, electronic control system with LED signalling. Housing made of a fire retardand, impact and high temperature resistant plastic.
|
Technical data |
|
|
Power voltage, [V AC] |
230 |
|
Maximum power, [W] |
2000 |
|
Output air temperature scope, [°C] |
150÷650 |
|
Air flow, [m3/h] |
5 |
|
Protection |
Thermostat, electronic programof switching off during 80 s |
|
Ambient temperature, [°C] |
-10÷+50 |
|
Indicators |
8xLED, |
|
Dimensions, [mm] |
255x200x70 |
|
Weight [kg] |
0,8 |
|
Protection class |
IP40 |
|
Item No. |
150-409400 |
Gas soldering tools Z-GL 3114, GL 3212, Z-GL 3215
Application: Soldering, brazing, shrinking heat-shrink tubes, cutting plastic elements.
Set contents:
Z-GL 3114 – Soldering torch, soldering wire, tips: soldering, conical, diagonal 3 mm, chisel 3,5 mm, knife, hot blow, reflecting, flat wrenches 7 i 8 mm, sponge pad.
Z-GL 3215 – Soldering torch, soldering wire, tips: soldering conical, chisel 3,5 and 7 mm, diagonal 2,5 i 3,5 mm, knife, hot blow, wide flame 25 mm, sponge pad.
GL 3212 – Soldering torch, soldering tip.
GL 3212
Z-GL 3114 Z-GL 3215
|
Type |
Max. temperature of tip /
flame |
Piezoelectric ignition |
Item No. |
|
Z-GL 3114 |
500 / 1300 |
yes |
150-412000 |
Note!
We recommend to use
our butane gas (300 ml pack).
Item No.:
150-409500.
Accesories
Soldering SH-1 and SH-10 heads for gas tools Z-GL and GL (spare parts)
|
Description |
Type |
Tool types |
Item No. |
|
|
|
Soldering heat with catalyst |
SH-10 |
Z-GL 3114 |
150-412040 |
Gas heater, GL 1300 type
GL 1300 gas heater has its own supply source and is a multipurpose tool. It has its own gas reservoir which is filled in the same manner as the reservoir of a gas lighter. One filling is enough for 90 to 180 operating hours according to the temperature setting. The temperature can be smoothly adjusted by changing gas and air supply. This all purpose tool may be operated in three modes:
1. With a copper soldering tip fitted with catalytic converter, for soldering and unsoldering in repairing, modelling-works, laboratory and at stained-glass windows.
2. With not air nozzle fitted with catalytic converter, for shrinking heat shrinkable tubes, as well as for soldering and unsoldering in repairing and laboratory.
3. With open flame for soldering thin copper pipes, manufacturing jewelry or tin plating of corroded places on car bodies.
Technical data:
Gas tank capacity: approx. 25 ml
Working temperature:
– with soldering tips up to 400 °C
– with hot air nozzles up to 600 °C
– open flame up to 1300 °C
Power: up to 135 W
Operation time: up to 180 min.
Weight: 150 g
Length: 200 mm
Diameter: 25 mm
Standard equipment: hot air nozzle, soldering tip.
Item No.: 150-409460.
Butane gas
Gas in the form of a container with fluid. Enables the gas tank of the heater to be filled.
Item No.: 150-409500.
